IC500/IC1000 controller

IC500/IC1000 controller

Since January 2019, IC500/IC1000 rev.B2 has been replaced by IC500/IC1000 rev.B4.

The IC500/IC1000 rev.B4 has the same capabilities than the IC500/IC1000 rev.B2 (eg. 2 readers, 4 inputs, 3 relays, RS485 connectivity, etc.).

In addition, the IC500/IC1000 rev.B4 offers the following features:

• All on-board inputs are supervised
• Diagnostic LED for each input
• An additional input for tamper (MS) monitoring 
• An additional input for PSU Failed monitoring
• Lantronix or Tibbo type TCP adapter
• 512K or 2M RAM models
• 32-bit CPU option

Note: The firmware of the IC500/IC1000 rev.B4 is different from the IC500/IC1000 rev.B2's one.
Please ask us before trying to update a controller firmware.

Further information on this can be found here: Updating Controller Firmware